Only in strict accordance with the standard operation can we effectively avoid risks and extend the service life of mining machinery, which how to use the excavator correctly do you know what skills are there? The following small series of Henan glide excavator rental will share the following 7 points of relevant knowledge for you, hoping to help you.

1. Operation technology

First of all, confirm the working environment around you, look at the surrounding terrain, see if there are any obstacles, and these things should be in mind. When working, to confirm the front and back direction of the track, be sure to... The track is in full contact with the ground, which is important, because that's what all the rollover accidents are about.

2, effective mining methods

We must have some understanding of the work force of the excavator, when the force is large and when the resistance is small, I believe that everyone should be very clear. So can you make good use of what you know? That's the key. Only by doing this can we improve our work efficiency.

3. Slope leveling work

In fact, this is the main thing, again, be sure to put the machine flat to prevent the body from shaking! In fact, any project should be as flat as possible.

4. Dig rocks

As we all know, excavating rocks can be very damaging. It should be avoided as much as possible, but if you really want to dig, you should observe the position of the rock and then adjust the position of the bucket. Get the rock out with as little damage as possible. Once or twice and no matter, if you can adhere to each time, this also plays a great role in the maintenance of the excavator.

5, relatively loose software zone or water work

This may seem simple, but in fact, accidents often occur here. The main reason is that it is easy to be ignored. Although the work is easy to dig, it is also easy to tilt. So not to be underestimated!

6. Loading operation

When loading, we must also control the level and stability. Make sure you leave enough room, which means there must be a place for rotation. The purpose of this is to prevent collisions, collisions with trucks. And if there's sand, gravel, big rocks. You should start with the fluffy ones. Because it allows... The collision with the trunk!

7. Crushing operation

This popular must be steady and accurate, I believe that broken friends understand. But not too hard. When it breaks, the cannon head must not be in there for more than a minute. Because it destroys the machine, and it also destroys the crushing hammer.