There are some matters that need to be paid attention to in the cold winter weather driving the loader, which matters need to be paid attention to in the winter driving the loader do you know? The following Henan slip loader Xiaobian will share the following points that need to be paid attention to, I hope to help you.

1, winter vehicle use is relatively difficult, it is recommended that each start should not exceed 8 seconds, if can not start, should loosen the start switch, stop for 1 minute after the second start. After the engine starts, idling for a period of time (it should not be too long, too long will form carbon deposits on the inner wall of the cylinder, there will be a cylinder pulling phenomenon), one to charge the battery, two to make the water temperature reach 55 ° C and the pressure gauge reach 0.4Mpa, and then start driving;


2, the general temperature is below 5 ° C, the engine should be heated before starting water or steam to preheat, to preheat to 30~40 ° C and then start (the main preheating cylinder temperature, and then heating the temperature of fog diesel, because the general diesel engine for pressure combustion);


3. Full load operation is allowed when the water temperature of the diesel engine is higher than 55 ° C and the oil temperature is higher than 45 ° C; During operation, the water temperature and oil temperature of the engine should not exceed 95℃, and the oil temperature of the torque converter should not exceed 110℃;


4. When the temperature is below 0 ° C, the cooling water in the water tank, engine, oil cooler and torque converter oil cooler should be released after work every day to avoid freezing and cracking; There is water vapor in the cylinder, which is often discharged to prevent freezing, resulting in brake failure. If antifreeze has been added, do not release.